Hall Effect Sensor: The 37 Sensor test module comes with a super magnet to test the magnetic sensor modules. Fit the Hall Effect Sensor to Port 4. Bring a magnet up to the face of the Hall device and the LED will turn ON. The Hall device has a switch (transistor) that connects the signal pin to the ground pin. The "signal out" goes from HIGH to LOW - instantly. The circuit contains a Schmitt-trigger to do this. If you want to detect gradual increase in magnetic strength, use KY-024. See module KY-035 and compare the two.
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন